GRIPPIX

• Solvent-free, amine-free and epoxy resin-free adhesive
• Low viscosity and optimal processability
• Excellent line grip: consistent adherence even on difficult surfaces
• Suitable for all types of multilayer parquet flooring
• 20-30% higher yield than two-component adhesives
• Ideal for heating substrates
• No mixing: ready to use

Subfloor preparation

• Make sure the substrate is dry, clean, stable and firm.
• In case of high residual moisture, use waterproofing primer (e.g. Eco Prim PU 1K).
• On existing floors (ceramic, marble, wood), sand or roughen the surface before bonding.

Application of the product

• Open the aluminum bag contained in the drum and pour directly onto the substrate.
• Spread with MAPEI notched trowel for parquet flooring.
• Apply only the amount of adhesive that can be worked within 110 minutes.
• Store leftover product by resealing the bag and removing any remaining air.

Laying parquet flooring

• Press the boards onto the bed of adhesive, avoiding sticking in the joints.
• Maintain a perimeter joint of about 1 cm around walls and overhangs.
• Installation temperature: +10°C to +25°C.

• Open time (skin formation): about 110 minutes
• Recording time: 3 hours
• Walkability: after about 12 hours
• Sanding: after 3 days

• Format: 15 kg (aluminum bag in plastic drum)
• Consistency: creamy paste
• Color: beige
• Consumption: 800-1000 g/m²
• Bulk density: 1.45 ± 0.05 g/cm³
• Viscosity: 32,000 ± 4,000 mPa-s
• Dry residue: 100%
• Shore A hardness: 55 (at 7 days)
• Elongation at break: 130%
• Wood-concrete adhesion: 1.8 N/mm²
• Operating temperature: -20°C to +80°C
• Storage: 12 months

• GRIPPIX is corrosive: it can cause serious eye damage.
• Wear gloves, goggles, face mask and protective clothing during use.
• It does not emit harmful vapors at room temperature, but can become sensitizing above +60°C.
• Professional use only.

Always consult the updated Safety Data Sheet before use.